Honda 08B23-S0X-100 Installation Instructions Manual page 8

23. Remove the sunvisor on the passenger's side (two
Torx bolts, and unplug the connectors).
VEHICLE
CONNECTOR
24. On the passenger's side of the vehicle, remove
the grab rail (two caps, two Torx bolts, and two
washers).
WASHER
TORX
BOLT
CAP
8 of 15
SUNVISOR
GRAB RAIL
25. On the passenger's side of the vehicle, remove
the lens from the roof ceiling vent at the second
row by releasing the four retaining tabs. Take care
not to damage the retaining tabs.
TORX
BOLT
26. Move the vent knob to the closed position, then
remove the two screws that fasten the roof ceiling
vent. Unplug the vehicle connector, and remove
the roof ceiling vent.
SCREW
(Gold)
AII 26017 (0308)
ROOF CEILING VENT
LENS
RETAINING
TAB
VEHICLE
CONNECTOR
SCREW
(Black)
VENT KNOB
(Move it to the
clsoed position.)
© 2003 American Honda Motor Co., Inc - All Rights Reserved.
ROOF
CEILING
VENT
SCREW