Cisco Catalyst 9600 Installation Manual page 13

Installing the Switch
• Number 1 and Number 2 Phillips screwdrivers
• 3/16-inch flat-blade screwdriver
• Tape measure and level
Procedure
Step 1 Position the support flange of the left shelf bracket on the front of the left rail. Align and secure the bracket
to the rack by using three screws. Use either 10-32 or 12-24 pan head screws from the shelf kit.
Step 2 Position the support flange of the right shelf bracket on the front of the right rail — make sure that it is level
with the left shelf bracket. Align and secure the bracket to the rack by using three screws.
Use the same type of screws for the left and right shelf bracket.
Figure 10: Installing the Shelf Brackets
1 Pan head screws from the shelf kit to secure
the shelf brackets to the rack posts
Installing the Shelf Brackets and the Crossbar
2 Shelf brackets
Installing the Switch
13