Cisco HWIC-3G-GSM Configuring page 39

Configuring the 3G Wireless High-Speed WAN Interface Cards for Cisco 1841, 1861, and 2800 and 3800 Series Routers
debug cell-hwic driver
To debug the Cisco IOS driver for the cellular interface, use the debug cell-hwic driver command in
EXEC mode.
Syntax Description slot/wic_slot/port
crcdump
errdump
errors
Command Default None
Command Modes EXEC (#)
Command History Release
12.4(11)XV
12.4(15)T
12.2SX
Usage Guidelines Use this command for debugging purposes only.
Related Commands Command
debug cellular messages async
debug cellular messages data
debug cellular firmware
debug cellular messages
management
debug cellular messages dm
debug cell-hwic virt-con
Configuring the 3G Wireless High-Speed WAN Interface Card for Cisco 1841, 1861, and 2800 and 3800 Series Routers (HWIC-3G-GSM and
debug cell-hwic slot/wic_slot/port driver {crcdump | errdump | errors}
Numeric values that indicate the router slot, WAN interface card (WIC) slot,
and port.
CRC error details.
Other error details.
Errors debugging.
Modification
This command was introduced.
This command was integrated into Cisco IOS Release 12.4(15)T.
This command is supported in the Cisco IOS Release 12.2SX train. Support
in a specific 12.2SX release of this train depends on your feature set,
platform, and platform hardware.
Description
Debugs cellular async.
Prints Cisco IOS data path debug messages.
Displays Cisco IOS firmware information.
Prints management path messages, such as CnS.
Prints diagnostics monitor (DM) messages from the Qualcomm
CDMA chipset.
Redirects the Nios II console driver messages to display them in the
Cisco IOS router console environment.
debug cell-hwic driver
39