Cisco HWIC-3G-GSM Configuring page 35

Configuring the 3G Wireless High-Speed WAN Interface Cards for Cisco 1841, 1861, and 2800 and 3800 Series Routers
cellular gsm profile create
To create a new modem data profile, use the cellular gsm profile create command in privileged EXEC
mode.
Syntax Description slot/wic_slot/port
profile number
apn
authentication
username
password
Command Default None
Command Modes
Privileged EXEC
Command History Release
12.4(11)XV
12.4(15)T
Usage Guidelines
Some of the command parameters, such as username, password, and authentication, are optional, and do
not need specification. When multiple profiles are created, you can select the profile used to set up the
data call by including the profile number in the ATDT command (ATDT*99*<profile number>#). If you
do not include a profile number in the ATDT command (ATDT*99#), profile 1 is used.
Examples The following example shows output for this command:
router# cellular 0/0/0 gsm profile create 3 apn.com chap GSM GSMPassword
Profile 3 will be created with the following values:
APN = apn.com
Authenticaton = CHAP
Username = GSM
Password = GSMPassword
Are you sure? [confirm]y
Profile 3 written to modem
Configuring the 3G Wireless High-Speed WAN Interface Card for Cisco 1841, 1861, and 2800 and 3800 Series Routers (HWIC-3G-GSM and
cellular slot/wic_slot/port gsm profile create <profile
number><apn><authentication><username><password>
Numeric values that indicate the router slot, WAN interface card (WIC) slot,
and port.
Number for the profile you are creating. You can create up to 16 profiles.
Access point name. You must get this information from the service provider.
The type of authentication. For example, CHAP or PAP.
The username provided by your service provider.
The password provided by your service provider.
Modification
This command was introduced.
This command was integrated into Cisco IOS Release 12.4(15)T.
cellular gsm profile create
35