Makita GA7060 Technical Information page 14

5-3 Large spiral bevel gear, Ball bearing 608ZZ/ 6905LLB / 6203DDW, SJS-II components for models GA7061,
GA9061, GA7061R, GA9061R (cont.)
5-3-1 Disassembling (cont.)
Fig. 5-3-1-10
[10] Slide Flat washer 17 so that you can
press it down in the next step.
Fig. 5-3-1-12
[12] Remove three M4x16 Pan head screws and Bearing retainer 59.
M4x16 Pan head screw (3 pcs.)
Bearing retainer 59
Fig. 5-3-1-11
[11] Receive Bearing box complete on two pieces of 1R258, then press down
Flat washer 17 with 1R245 to remove Large spiral bevel gear..
Note: Flat washer 17 is deformed by the step. Therefore, replace it with
a new one.
1R245
1R258
Ball bearing 6905LLB
See step [13] in the next page.
14 / 25
1R258
Flat washer 17
Large spiral bevel gear