Table 1 : How To Use Node Object Management - AEG Somfy LPT-10 Functional Description

AEG
• For the first one ,1 value is possible :
ID=0 : node object
• For the second one , 4 values are possible
0 :RQ_NORMAL :enable object and remove override.
1 :RQ_DISABLED : disable object.
2 :RQ_UPDATE_STATUS : just report status.
5 :RQ_REPORT_MASK : report status bit mask.
This input variable is linked with :
SNVT_obj_request nviRequest
How to use :
ACTION
You want to know the
status of the node object
and set the nvoStatus with
current object 0 status.
To report the status of any object of the node , the node use an output variable.
4 fields are used for report the status of any object of the node :
• one reports the ID number
• A status is reported whenever a request is received for an object id that is not defined
in the node.
2 values are possible
• Reporting a status is required if an unsupported request code is received on the object
request input network variable.
2 values are possible
• reporting if the status is disable or enable
2 values are possible
These parameters are linked with the output variable
SNVT_obj_status nvoStatus
12/15
nviRequest
object_id
0

Table 1 : How to use node object management

0 :disable
1 :enable
0 :disable
1 :enable
0 :disable
1 :enable
Functional description Sun
ref FD 157990 Version 1.0
object_request
2
17 November 1998