Table of Contents
Advertisement
SNMP Solo
4.
Enter a name for the object in the Selection and Label
fields of the Add Object box.
5.
Highlight IP Map from Object Attributes group.
6.
Select Set Object Attributes button.
7.
Enter Host name and IP address of SNMP Solo
adapter.
8.
Enter OK.
9.
Enter OK at Add Object menu.
Enter OK at Add Object:palette.
10.
Poll the Device OIDs
1.
From the main menu, select Monitor: MIB values then
Browse MIB: SNMP.
2.
Move around the MIBs to view the UPS device
information.
Set the Device OIDs
From the main menu, select Monitor: MIB values then Browse
MIB: SNMP.
1.
Select a MIB variable you want to alter; click on it.
2.
Enter the new value then click on Set.
Click on Start Query to view the changes.
3.
Ping the SNMP Solo
1.
Change active Window to Shell.
2.
Type ping <IP address> and press <enter>.
Novell's NetWare Management Station v.2.0
Compile the Device MIB
1.
Copy the UPS MIB file from the DOS formatted diskette
into the subdirectory
\nms\snmpmibs\current.
2.
From the main menu, select Tools then SNMP MIB
Compiler.
3.
From the SNMP MIB Compiler box, select Compile.
26
Configuring the NMS
Advertisement
Table of Contents
