Removing The Board - Makita DVC660 Instruction Manual

Cleaning the room for filter bag/
dust bag
When cleaning the room for filter bag/dust bag, remove
and wipe the board inside.
► 1 . Board

Removing the board

1. Remove the HEPA filter. Refer to the section for
cleaning the HEPA filter for how to remove.
2. Push down the board, and slide it to left until the
board touches the wall.
3. Lift the right side of the board up and take it out.
► 1 . Board
The board is supported by three springs.
If the springs came off from the board or the lever,
reattach them as illustrated.
2
1
► 1 . Spring for board 2. Spring for lever 3. Projection
NOTE: Attach the springs securely so that the springs
touch the root of the projections.
Attaching the board
1. Insert the straight side of the board into the
catches in the lower left side of the room.
2. Put the right side of the board in place.
3
1
2
► 1 . Board 2. Straight side 3. Catch
17 ENGLISH
3
1
1