Table of Contents
Advertisement
2. Select a zone and click
3. Edit the zone name.
4. Select a zone type.
Instant Zone
The system will immediately trigger an alarm when it detects
triggering event after system armed. Detectors can be set as
this type, which can be used in places such as supermarket.
Delayed Zone
Exit Delay: Exit Delay provides you time to leave through the
defense area without alarm.
Entry Delay: Entry Delay provides you time to enter the
defense area to disarm the system without alarm.
The system gives Entry/Exit delay time when it is armed or
reentered. It is usually used in entrance/exit route (e.g. front
door/main entrance), which is a key route to arm/disarm via
operating keyboard for users.
Note
You can set the delayed time duration in System → Schedule
& Timer .
Follow Zone
The zone acts as delayed zone when it detects triggering
event during system Entry Delay, while it acts as instant zone
otherwise. It is usually set in the living room or hall with
perimeter delayed zones at the same time.
Perimeter Zone
The system will immediately alarm when it detects triggering
event after system armed. There is a configurable interval
between alarm and siren output, which allows you to check
the alarm and cancel the siren output during the interval
time in case of false alarm. It is usually used in the perimeter
area, such as doors and windows.
When the zone is armed, you can set the peripheral alarm
delayed time in System → Schedule & Timer . You can also
mute the siren in the delayed time.
24H Silent Zone
The zone activates all the time without any sound/siren
output when alarm occurs. It is usually used in the sites
equipped with panic button (e.g., bank, jewelry store).
Panic Zone
Figure 2-24 Zone Page
to enter the Zone Settings page.
74
Advertisement
Table of Contents
