Makita BO6050 Technical Information page 8

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -2. Gear housing complete section
DISASSEMBLING
Fig. 14
(32)
Fig. 15
14. Supporting Gear housing complete (25) with 1R032, 1R033, 1R034, remove Outer spindle complete section (29)
by pushing 1R247 with Arbor press. So, Spiral bevel gear 43 (16) is removed from Gear housing complete (25).
(16)
(25)
1R032
(26)
(27)
(29)
Do not re-use the parts items designated with this mark, because it is difficult to proceed
the repair without giving them damage or deformation.
1R269
1R247
(29)
1R033
1R034
Outer spindle complete section (29)
(28)
(29)
Apply 1R032/ 1R033/ 1R034 to three circled portions.
<Note> Do not apply them to Ball bearing.
(16)
(26) Retaining ring S-30
(27) Ball bearing 6906DDW
(29) Outer spindle complete
P 8 / 28
12. Remove Ball bearing
6001DDW (32) with 1R269.
<Note> Do not reuse
Ball bearing 6001DDW (32).
13. Unscrew three M4x12
Pan head screws (28).
(29)