Makita BO6050 Technical Information page 25

W
iring diagram
Fig. D-4
Wiring equipped with Line filter
Pass Field lead wires (white),
(black) through the Line filter's
hole.
And put Line filter to the place
illustrated bellow.
<Section A - A>
from Field
Wiring without Line filter
Put the sag of Field lead wire
(white) to the illustrated place.
<Section A - A>
Fix Field lead wires (black), (white)
in this lead wire holder.
Put sag of Field lead wire
(black) connected to
Closed end terminal
to this lead wire holder.
Expand Field lead wires in Motor housing.
Wiring on Motor housing
Fix Field lead wire (black) in these lead wire holders to avoid sagging.
Field lead
wire
(black)
Line filter
Field lead
A
wire
(white)
to Switch
A
Fix the following Lead wires
in these Lead wire holders.
* two Lead wires (black)
connected to Closed
end terminal
* Field lead wire (white)
Dial side
Dial
Rib B
Put Closed end terminal
between Rib A and B.
Rib A
Put Field lead wire (white) to
this groove.
P 25 / 28