Makita BO6050 Technical Information page 21

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -5. Front switch lever, Rear switch lever
ASSEMBLING
1. Disassemble Gear housing complete section in the order of Fig. 3 - 8.
2. Disassemble Armature from Motor housing. See Fig. 32 - 34.
Fig. 54
(71)
Fig. 55
(71)
Fig. 56
(65)
(66)
(65)
3. Insert Front switch lever (62) into
Motor housing (71).
(62)
(61)
(62)
projection of (66)
projection
of (65)
Hole of (62)
(62)
4. Fit hook of Switch knob (61)
to the framed portion of Front
(61)
(62)
switch lever (62), passing
through the hole of Motor
housing (71).
5. Push Front switch lever (62)
in a direction designated with
yellow arrow while holding
the Switch knob (61).
6. Pull up Front switch lever (62).
7. Pushing Rear switch lever (65)
toward Armature fan side, engage
its hook with the projection of Switch (66).
8. Fit the projection of Rear switch lever (65)
to the hole of Front switch lever (62).
P 21 / 28