Makita BO6050 Technical Information page 19

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -4. Top cover section
ASSEMBLING
Fig. 48
3. Set Guide plate (5) and Change plate (3) to Top cover (7), aligning their holes to Spur gear 31 (9).
4. Set Change knob (2) to Top cover (7), facing its triangle mark to the direction shown in photo.
5. Tighten Change knob with one 4x14 Tapping screw (1) while maintaining direction of Triangle
mark to the same direction in step 4.
Fig. 49
(9)
(2)
(3)
(5)
(9)
(7)
groove
Projection of (3)
of (9)
(3)
(2)
(1)
Triangle mark
6. Fitting protrusion of Change plate (3)
to the groove of Spur gear 31 (9),
assemble Compression spring 5 (4).
(4)
7. Demonstrate if Change knob (2) works right
or not by turning it.
P 19 / 28