Advertisement
Status LEDs and Buttons
Figure 1-3
1
2
3
4
5
Table 1-1
Front Panel LEDs, Definitions of States
LED Name
1
Hard drive fault
2
Hard drive activity
3
Power button/LED
4
Unit identification
Cisco MSE 3365 Installation Guide
1-4
Front Panel LEDs
BAY 02
BAY 01
BAY 05
BAY 04
Hard drive fault LED
Hard drive activity LED
Power button/power status LED
Identification button/LED
System status LED
State
•
Off—The hard drive is operating properly.
•
Amber—Drive fault detected.
•
Amber, blinking—The device is rebuilding.
Amber, blinking with one-second interval—Drive locate function activated.
•
Off—There is no hard drive in the hard drive tray (no access, no fault).
•
Green—The hard drive is ready.
•
Green, blinking—The hard drive is reading or writing data.
•
•
Off—There is no AC power to the Cisco MSE 3365.
•
Amber—Cisco MSE 3365 is in standby power mode. Power is supplied only to the
Cisco IMC and some motherboard functions.
•
Green—Cisco MSE 3365 is in main power mode. Power is supplied to all the MSE
3365 components.
•
Off—The unit identification function is not in use.
•
Blue—The unit identification function is activated.
3
4
5
1
2
BAY 03
BAY 06
BAY 07
BAY 08
6
Fan status LED
7
Temperature status LED
8
Power supply status LED
9
Network link activity LED
Chapter 1
6
8
7
9
Overview
Advertisement
