Honeywell DirectLine DL423 User Manual page 21

Step Operation
3 Enter Cell Factor
Selection (if
applicable)
Edit Cell Factor
Selection
Select desired Cell
Factor
Save the Cell Factor
4 Enter TDS Factor
Selection (if
applicable)
Edit TDS Factor
Selection
Select desired TDS
Factor
Save the TDS
Factor
5 Enter Solution
Type Selection
Edit Solution Type
Selection
Select desired
Solution Type
Save the Solution
Type
continued
9/11
Press
MODE CFAC (for 1 second) then,
Momentarily (Current Selection)
MODE Flashing Display – You are now in EDIT
Hold mode
(Value of current Cell Factor selection)
To select:
Momentarily
MODE Selection for Cell Factor
Momentarily
MODE tdSF (for 1 second) then,
Momentarily (Current Selection)
MODE Flashing Display – You are now in EDIT
Hold mode
(Value of current TDS Factor selection)
To select:
Momentarily
MODE Selection for TDS Factor
Momentarily
MODE SOLU (for 1 second) then,
(Current Selection)
Momentarily
MODE Flashing Display – You are now in EDIT
Hold mode
(Value of current Solution Type selection)
To select:
Momentarily
MODE Selection for Solution Type
Momentarily
DirectLine® DL423 Sensor Module User Manual
Display
0.850 to 1.150 (1.000 default)
0.010 to 1.999 (0.500 default)
nonE, HCL, H2SO4, nACL (default),
nAOH
Configuration
15