Table of Contents
Advertisement
English
CAUTION
Keep children and infi rm persons away.
When not in use, tools should be stored out of reach of children and infi rm persons.
CORDLESS IMPACT DRIVER SAFETY WARNINGS
1.
Hold power tool by insulated gripping surfaces, when performing an operation
where the fastener may contact hidden wiring. Fasteners contacting a "live" wire
may make exposed metal parts of the power tool "live" and could give the operator
an electric shock.
2.
This is portable tool for tightening and loosenig screws, bolts and nuts. Use it only
for these operation.
3.
Use the earplugs if using for a long time.
4.
One-hand operation is extremely dangerous; hold the unit fi rmly with both hands
when operating.
5.
After installing the driver bit, pull lightly out the bit to make sure that it does not
come loose. If the bit is not installed properly, it can come loose during use, which
can be dangerous.
6.
Use the bit that matches the screw.
7.
Tightening a screw with the impact driver at an angle to that screw can damage the
head of the screw and the proper force will not be transmitted to the screw. Tighten
with this impact driver lined up straight with the screw.
8.
Always charge the battery at a temperature of 0 – 40°C.
A temperature of less than 0°C will result in over charging which is dangerous. The
battery cannot be charged at a temperature greater than 40°C.
The most suitable temperature for charging is that of 20 – 25°C.
9.
Do not use the charger continuously.
When one charging is completed, leave the charger for about 15 minutes before
the next charging of battery.
10. Do not allow foreign matter to enter the hole for connecting the battery.
11. Never disassemble the battery and charger.
12. Never short-circuit the battery.
Short-circuiting the battery will cause a great electric current and overheat. It
results in burn or damage to the battery.
13. Do not dispose of the battery in fi re.
If the battery burnt, it may explode.
14. Do not insert object into the air ventilation slots of the charger.
Inserting metal objects or infl ammables into the charger air ventilation slots will
result in electrical shock hazard or damaged charger.
15. Bring the battery to the shop from which it was purchased as soon as the post-
charging battery life becomes too short for practical use. Do not dispose of the
exhausted battery.
16. Using an exhausted battery will damage the charger.
24
Advertisement
Chapters
Table of Contents
