Honeywell SPM Flex User Manual page 46

SPM Flex Gas Detector
Configuration Manager
Access to options for up to five internal flash slots can be chosen from the
Configuration Manager menu� Information can also be imported to or exported
from the detector via the USB option�
Test menu
The detector's optical system can be checked from the Optics Verification screen
(using the verification card�) Alarms 1 and 2, maintenance faults, and instrument
faults can be tested from the Simulate menu� The alarms and faults can also be
reset from the Simulate menu� The Force Relays and Force 4-20 mA options are
also available through the Test menu�
Power off
Select "Power off" to shut off the detector� Selecting this option has the same
effect as pressing and holding the power button for 5 seconds�
Duty cycle
This function allows the user to extend the duration of the tape advance interval�
This is useful in applications in which a background level of gas is expected in
normal operation� This interval can be configured for up to seventeen minutes�
When in monitor mode, if the detector reaches its maximum concentration for
that window, it will hold and display a countdown informing that it is waiting for
the duty cycle to expire�
The Duty Cycle menu can be found at Main menu > Set up > Monitoring > Duty
Cycle.
CAUTION
!
The detector does not monitor gas levels while the duty cycle is counting down�
46