Advertisement
Use a flat-head screwdriver to screw in the Champ connectors and tie wrap the connector to the chassis,
Step 8
as shown in
Figure 6
1
1
2
Plug the AC power cord into the wall outlet or reinsert the fuses in the fuse and alarm panel.
Step 9
Set the circuit breaker on the DC PEM to the ON (1) position.
Step 10
Standards and Certifications
The DSL interface module has the same standards as the Cisco 6015 system, as shown in
Table 3
Area of
Compliance
Product Safety
Emissions
Immunity
NEBS
Telecom
ETSI
OL-2186-01
Figure
6.
Attaching the Champ Connector the Chassis
3
Champ connector screw
Tie wrap
Regulatory Compliance for Cisco 6015 Hardware
Compliance Standard
UL 1950, 3rd Edition, EN 60950, AS/NZS 3260, IEC 950,
FCC Part 15, Class B
CISPR22, EN55022, AS/ANS 3548, ICES-003, VCCI, BSMI (CNS 13438)
EN61000-4-2, 3, 4, 5 and 6 / IEC-61000-4-2, 3, 4, 5 and 6;
EN61000-4-11 / IEC-61000-4-11
Bellcore GR-63-CORE, GR-1089-CORE, SR-3590 Level 3
FCC Part 68, CS-03, ACA TS 016: 1997, CTR 12 97/520/EC
Amendment 1 1997 (TBR 12), JATE GREEN BOOK 1997
300-386-1, 300-386-2, 300-019
2
3
Champ connector
Standards and Certifications
Standards and Certifications
Table
3.
15
Advertisement
