S/Pdif Tab; Disabled; Front Left And Right Channels - Philips PSC705/05 User Manual

S/PDIF Tab

This page of the Philips Seismic Edge Control Panel will control the settings for the Digital Audio input and
output. S/PDIF is the acronym for industry-wide standard called Sony/Philips Digital Interface. This tab is
linked to the settings tab. If you selected 5.1 speakers under the settings tab, S/PDIF Out is disabled and will be
grayed out. Selecting Headphone, 2 or 4 speaker mode will allow you to select a desired S/PDIF Output.
S/PDIF O (N 5.1 )
UT OT FUNCTIONAL IN SPEAKER MODE

Disabled

In this mode S/PDIF Out is disabled. Select one of the following options to determine what content will be sent
to the S/PDIF Out connector.

Front Left and Right Channels

In this mode the same content being sent to the front Line Out speaker jack in analog format will also be sent to
the S/PDIF output in digital format for applications running on your PC (MP3, games, etc.). For external inputs
(CD-In or Line In), select the proper source on the "Apply Reverb/QXpander/QMSS to External Input Source"
pull down menu located on the Settings tab. Use this mode if you are using digital S/PDIF speakers for your
front speakers or wish to send the front speaker stereo signal to an external device connected to the S/PDIF
output such as a mini-disk recorder or receiver with S/PDIF In. Please note that the volume settings on the
Settings tab will have no affect on the signal on the S/PDIF output.
30