Using The Philips Seismic; Joystick Configuration For Technical Support; Edge Control Panel For Windows ® 95/98/2000/Xp; Dos - Philips PSC705/05 User Manual

Using the Philips Seismic Edge Control Panel for DOS
To launch the DOS control panel:
1. Go to C:\Seismic\ (C represents you hard drive)
2. Type VOLCNTRL.EXE
This application allows you to adjust volume levels, balance, input levels, synthesizer modes, speaker modes,
and midi effects in real DOS.
In DOS games that have music settings, if you select FM synthesis in the game, make sure the synth control in
the control panel is set to OPL3. For games that support MIDI (mpu-401), select the WVTBL (wavetable)
option. The game publisher normally has this information in the program documentation.
NOTE: This application is for real MS-DOS mode only and should not be run under windows. In Windows®,
use the Windows® mixer for adjusting playback and recording levels.
Joystick Configuration for Windows® 95/98/2000/XP:
1. Open the Control Panel and double-click on the Game Controllers icon. Select the Advanced tab and
under Port Driver Assignment and select Philips Seismic Edge GamePort.
21