Windows Nt® Installation; Siren Xp Ress Installation For Real Mode Dos Installation (Optional) - Philips PSC705/05 User Manual

5.1 channel pci sound card
Table of Contents

Advertisement

Windows NT® Installation
Installation of the drivers for your Philips Seismic Edge™ in a Windows NT® environment
are as follows (note: you must have the appropriate privileges in order to install the drivers):
1) Boot the system to the Windows NT® desktop and insert your installation CD in your CD-ROM drive.
2)
3) Go to D:\NT40\English and double click on Philips Seismic Edge Install.exe. (D: represents your CD-ROM
drive).
4)
5) Wait a couple of minutes while the data transfers. Once it finishes the Philips Seismic Edge Settings
window will appear. Click OK on the settings page and then when the "System Settings Change" page
comes up and prompts you to restart, click the "Restart Computer Now" button.
That's it! Once the system reboots to Windows NT® your Philips Seismic Edge
fully functional as will be indicated by the Windows® Startup sound.
Siren XPress Installation for Windows NT®
Follow these steps to install the Siren XPress. This application allows you to play and organize music.
1) Insert your install CD into your CD drive
2) Go to D:\Applicatoins\Sonic Foundry\Siren\ (D: represents your CD-ROM drive)
3) Double Click on Sirensetup.exe
4) Follow the on-screen instructions for installation
R
M
DOS I
EAL
ODE
This step is only required if you intend to run DOS applications under real
DOS mode by restarting your computer in "MS-DOS mode". This step is not required to run DOS applications
in a DOS box (MS-DOS prompt).
In real DOS mode, you must have your DOS CD-ROM drivers loaded for
access to the install CD. Another way to do this is to simply run INST_DOS.BAT from a DOS box in Windows.
Run INSTALL.EXE from the DOS directory on the CD. This installation
program will create the TBird directory on any drive you desire. Follow the screen prompts to install the files to
your hard drive. The install program will edit your autoexec.bat file to perform automatic initialization of Philips
Seismic Edge for use in real mode DOS .
(O
NSTALLATION
)
PTIONAL
TM
should be
20

Advertisement

Table of Contents
loading

This manual is also suitable for:

Psc705/00bPsc705/00Psc705b/00Seismic edge

Table of Contents