Makita 9015DB Instruction Manual page 6

Installing wheel guard
CAUTION:
Always be sure that the tool is switched off
and unplugged before installing or remov-
ing the wheel guard.
Mount the wheel guard with the tab on the
wheel guard band aligned with the notch
on the bearing box. Then rotate the wheel
guard 180 degrees counterclockwise. Be
sure to tighten the screw securely.
Mount the inner flange first on the spindle,
then fit the wheel on over it. Finally, while
keeping the flange side of the lock nut on
the wheel side, screw lock nut onto the
spindle.
Installing side grip (auxiliary handle)
CAUTION:
Always be sure that the tool is switched off
and unplugged before installing or remov-
ing the side grip.
Screw the side grip on the tool securely.
The side grip can be installed on either side
of the tool, whichever is convenient.
Lock nut
Depressed
center
wheel
Inner flange
6