Table of Contents
Advertisement
3. When you have finished cleaning,
reposition the tray support frames inside
the oven and fasten them with the
fastening ring
nuts.
4.4 Extraordinary maintenance
Removing the door seal
To remove the seal:
• Pull the seal outwards to remove it.
To refit the seal:
• Position the seal in the groove at the
front, then press carefully down on it until
it adheres to the face of the appliance.
Seal maintenance tips
The seal should be soft and elastic.
• To keep the seal clean, use a non-
abrasive sponge and wash with
lukewarm water.
80
Cleaning and maintenance
Replacing the internal light bulb (some
models only)
Live parts
Danger of electrocution
• Disconnect the appliance power supply.
The oven is fitted with two 40W
light bulbs.
1. Completely remove all accessories from
inside the oven.
2. Remove the rack/tray support frames.
3. Remove the bulb cover using a tool (e.g.
a screwdriver).
Take care not to scratch the
surface of the oven cavity.
Advertisement
Table of Contents
