Connecting The Unit Safely - Brother ADS-2400N Product Safety Manual

Product Safety Guide

Connecting the unit safely

WARNING
There are high-voltage electrodes inside the unit. Before you access the inside of the
machine, (for routine maintenance, such as cleaning), make sure you have unplugged
the power cord from the electrical socket as well as any Ethernet (ADS-2800W,
ADS-3600W only) cables from the machine.
DO NOT touch the AC adapter, or handle the plug with wet hands. Doing this may
cause an electrical shock.
DO NOT connect it to a DC power source or inverter. Doing this may cause an
electrical shock. If you are not sure what kind of power source you have, contact
a qualified electrician.
DO NOT use the unit if the power cord is frayed or damaged, doing so may cause an
electrical shock or fire.
DO NOT pull on the middle of the AC power cord. DO NOT allow anything to rest on
the power cord. DO NOT place the unit where people can walk on the cord. Doing this
may cause an electrical shock or a fire.
Brother strongly recommends that you DO NOT use any type of extension cord. Failure
to observe these precautions could cause a fire, electrical shock, or damage to the unit.
When disconnecting the AC adapter from the machine or from the power socket,
always hold the connector, not the cable, and pull firmly. Failure to do so may result
in exposed or broken power cord wires, fire, or electrical shock.
6