Page 1
10GBase-SR SFP+ Transceiver with DDM, 850 nm, 300 m, MMF, LC - Cisco SFP-10G-SR-S Compatible Model: N286-10G-SR-S Este guía esta disponible en español en la página de Tripp Lite: tripplite.com/support Ce guide est disponible en français sur le site Web de Tripp Lite : tripplite.com/support...
Optional Accessories • N820-Series 10G Duplex Multimode 50/125 LC Fiber Cables • P999-000 Anti-Static Wrist Strap Installation Notes: • SFP transceiver modules are static-sensitive devices that require proper handling. The included Tripp Lite anti-static ESD wrist strap or similar device should always be used when handling a transceiver module.
Page 4
Installation 2. Gently insert the transceiver module into the module socket of your device. Press the dust plug until it locks into place. 3. Verify the transceiver module is locked into place by trying to remove it from the module socket without releasing the latch.
Warranty and Product Registration 3-Year Limited Warranty Seller warrants this product, if used in accordance with all applicable instructions, to be free from original defects in material and workmanship for a period of 3 years from the date of initial purchase. If the product should prove defective in material or workmanship within that period, Seller will repair or replace the product, in its sole discretion.
Page 7
Warranty and Product Registration WARNING: The individual user should take care to determine prior to use whether this device is suitable, adequate or safe for the use intended. Since individual applications are subject to great variation, the manufacturer makes no representation or warranty as to the suitability or fitness of these devices for any specific application.
Page 8
Warranty and Product Registration Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. The user must use shielded cables and connectors with this equipment.