Honeywell SEK001 User Instructions page 3

Sensor evaluation kit for use with trustability rsc series and digital output versions of the hsc series and ssc series board mount pressure sensors

Table of Contents

Sensor Evaluation Kit, SEK001

for Use with RSC, HSC, and SSC Series

2.4 Connect the SEK001 to the Arduino Uno Rev3 to form the SEK001/Arduino Assembly

Place the SEK001 over the Arduino Uno Rev3 and align all pins and sockets. Gently, but firmly, press both boards together until

the SEK001 is seated on top of the Arduino Uno Board (see Figure 2).

Figure 2. SEK001/Arduino Assembly

3.0 DOWNLOAD AND INSTALL SOFTWARE AND FIRMWARE

3.1 Follow the steps given in Table 3.

32324959

HSCDRNN001ND2A5

SEK001

Arduino Uno Rev3

Sensing and Internet of Things 3

Issue B

Table of Contents