Honeywell SEK001 User Instructions page 2

Sensor Evaluation Kit, SEK001
for Use with RSC, HSC, and SSC Series
2.2 Choose the sensor to be evaluated. Click on the links to the specific series in Table 2 to access the product datasheets.
Table 2. SEK001 Compatible Pressure Sensors
RSC Series—High Resolution, High
Accuracy, Compensated/Amplified
24-bit Digital SPI-compatible output
DIP, SMT packages
DIP
2.3 Connect the sensor to be evaluated to the SEK001
The SEK001 is preconfigured with five jumpers in order to evaluate an HSC Series or SSC Series, I
purposes of these User Instructions, the part number being evaluated is HSCDRRN001ND2A5. (Note: For the other compatible
sensors, see Appendix C for the jumper selections and configure the jumpers accordingly.)
Mount the HSCDRRN001ND2A5 in the appropriate set of receiving sockets (S2) on the SEK001. The white dot on the socket set
indicates pin 1 of the sensor (see Figure 1). (Note: Only one sensor may be evaluated at a time.)
Figure 1. HSCDRRN001ND2A5 Mounted on the SEK001
2 Sensing and Internet of Things
HSC Series—High Accuracy,
Compensated/Amplified
Digital output versions only
SPI, I
SMT DIP
SEK001
C: DIP, SMT packages
2
I C: SIP packages P
2
SMT
Issue B
32324959
SSC Series—Standard Accuracy,
Compensated/Amplified
Digital ouptut versions only
SPI, I C: DIP, SMT packages
2
I C: SIP packages
2
SIP
C output, 5 Vdc sensor. For the
2
HSCDRRN001ND2A5
White dot