Option 5: Using An Accessory Rf Modulator - Philips HTS3566D/37B User Manual

Basic Connections
Option 5: Using an accessory RF
modulator
If your TV has only a single Antenna
Input jack (labeled as 75 ohm or RF In,)
you need an RF modulator in order to
view the DVD playback on the TV. See
your electronics retailer or contact
Philips for details about RF modulator
availability and operations.
A
Use the supplied composite video cable
(yellow) to connect the CVBS jack on
the main unit to the video input jack on
the RF modulator.
B
Use an RF coaxial cable (not supplied) to
connect ANTENNA OUT or TO TV
jack on the RF modulator to the
ANTENNA IN jack on the TV.
16
1_hts3565-66D_37_eng2_final813.i16 16 1_hts3565-66D_37_eng2_final813.i16 16
(continued)
Antenna
Back of RF Modulator
(example only)
AUX 2 AUX 1
C
Connect the Antenna or Cable TV
service signal to the ANTENNA IN or
RF IN jack on the RF modulator. (It may
have been connected to your TV
previously. Disconnect it from the TV.)
2008-03-27 3:11:59 PM 2008-03-27 3:11:59 PM