Audio Setup - Philips HTS3566D/37B User Manual

Setup Menu Options

Audio Setup

Speakers Volume
Speakers Delay
HDMI Audio
40
1_hts3565-66D_37_eng2_final813.i40 40 1_hts3565-66D_37_eng2_final813.i40 40
(continued)
(underlined options are the factory default settings)
Access the speaker's level setup menu. Use
the volume level for each connected speaker between -6dB to
+6dB. See 'Getting Started - Setting the speakers' channels'
for details.
Access the speaker's distance setup menu. Use
the delay times for the center and rear speakers based on the
listening position and distance. See 'Getting Started - Setting
the speakers' channels' for details.
Note: 1 ms increase/decrease of delay time is equivalent to one
(1) foot change in distance. Use the longer delay time settings
when the rear speakers are closer to the listener than the front
speakers.
This setting is only required if you are using the HDMI
OUT jack to connect your TV or other display device (see
'Option 4: Connecting to a HDMI-compatible TV'.)
{ Off }
{ All }
Notes:
– It may take a while for this unit and the input device to
communicate and initialize.
– It is not possible to listen to SACDs or copy-controlled DVD-
Audio CPPM (Content Protection for Playable Media) sources
using the HDMI connection.
– Turn off the HDMI audio output. You
can still enjoy the sound output through
the speaker system.
– The HDMI audio output will be same as
the audio stream being played back. In
the case when the playback audio format
is not supported, the audio output will be
changed to PCM (Pulse Code Modulation)
automatically.
keys to adjust
keys to set
2008-03-27 3:12:06 PM 2008-03-27 3:12:06 PM