Table of Contents
Advertisement
Using S-Video In jack
IMPORTANT!
– If S-video is used for DVD playback
connection, the system's Video Setup
setting will need to be changed
accordingly
●
Use the S-Video cable (not supplied) to connect
the system's S-VIDEO jack to the S-Video
input jack (or labeled as Y/C or S-VHS) on the
TV set.
●
To listen to TV channels through this system, use
the audio cables (white/red, not supplied) to
connect AUX IN jacks to the corresponding
AUDIO OUT jacks on the TV set.
Using an accessory RF modulator
IMPORTANT!
– If your TV set only has a single
Antenna In jack (or labeled as 75 ohm or
RF In), you will need a RF modulator in
order to view the DVD playback via TV.
See your electronics retailer or contact
Philips for details on RF modulator
availability and operations.
●
Use the composite cable (yellow) to connect the
system's VIDEO jack to the video input jack on
the RF modulator.
●
Use the RF coaxial cable (not supplied) to
connect the RF modulator to your TV's RF jack.
Connections
47
Advertisement
Table of Contents
