Using S-Video In Jack; Using An Accessory Rf Modulator - Philips MCD297/12 User Manual

Using S-Video In jack

LINE OUT
R L
FM aerial
75 Ω
VIDEO S-VIDEO
AM aerial
VIDEO OUT
R L
+
–
SPEAKER 4Ω
1
Use the S-Video cable (not supplied) to connect
the system's S-VIDEO jack to the S-Video
input jack (or labelled as Y/C or S-VHS) on the
TV set.
2
To hear the sound of this DVD Player through
your TV, use the audio cables (white/red-not
supplied) to connect LINE OUT (L/R) jacks of
the DVD Player to the corresponding AUDIO
IN jacks on the TV.
Connections

Using an accessory RF modulator

IMPORTANT!
– If your TV set only has a single
Antenna In jack (or labelled as 75 ohm or
RF In), you will need a RF modulator in
order to view the DVD playback via TV.
See your electronics retailer or contact
Philips for details on RF modulator
availability and operations.
RF coaxial cable to TV
ANT IN TO TV AUDIO IN
VIDEO
IN R
Antenna or
Back of RF Modulator
Cable TV signal
(example only)
FM aerial
75 Ω
AM aerial
1
Use the composite cable (yellow) to connect the
system's VIDEO jack to the video input jack on
the RF modulator.
2
Use an RF coaxial cable (not supplied) to
connect the RF modulator to your TV's RF jack.
L
CH3 CH4
LINE OUT
R L
VIDEO
S-VIDEO
VIDEO OUT
15