Installing The Tape Device Driver - NEC N8551-28F Instruction Manual

Installing the tape device driver

Install the tape device driver only when you want to use the Windows NT 4.0 backup (management
tool), or Windows 2000 backup (system tool).
Install the tape device driver in the basic processing unit. As the driver, use the provided floppy
disk. Prepare it beforehand.
For Windows NT 4.0 Users
1
Click [Start] button. Point [Setting] and click [Control Panel].
[Control Panel] dialog box appears.
2
Click [Tape Device] in [Control Panel].
[Tape Device] dialog box appears.
3
Click [Driver] tab.
4
Click [Add] button.
[Install Driver] dialog box appears.
5
Click the [Use Disk] button.
The [Install from floppy disk] dialog box is displayed.
6
Confirm that "A:\" is specified for the distributed file copy source (C):, and click the [Browse]
button.
The [Browse] dialog box appears.
7
Point to "WinNT4.0", then click the [Open] button.
[NT4ait.inf] is displayed in the [Search Files] dialog box.
8
Confirm that "NT4ait.inf" is specified as the file name, then click the [Open] button.
9
Confirm that "A:\WinNT4.0" is specified for [Distributed file copy source (C)] and click the
[OK] button.
The [Installing Drivers] dialog box appears.
10
Click "Sony AIT Tape Drive (NT 4.0)" displayed in the [Tape Device] box, and click the [OK]
button.
The driver files are copied, then installation is completed.
Built-in AIT 11