Honeywell PRIMAIR PLUS Series Instructions Manual page 7

10. YEAR OF MANUFACTURE
Information about the year of manufacture of the major components can be recognized as described here:
Air hood / mask: Silver sticker with date of manufacture. To be found on the inside of the head section;
Filters: See separate operating instructions for filters;
Hose assembly: See bayonet connection;
Blower and battery: See reverse of the blower unit.
11. STATUTORY REQUIREMENTS AND REGULATIONS
89/686/EEC
EN12941
Production control according to
article 11B
Marks on the system:
The EC standards apply to complete equipment complying with the CE configurations certified by the notified
bodies having conducted the CE type examination.
Failure to comply with this procedure invalidates the CE marking.
12. GENERAL
Honeywell Respiratory Safety Products cannot, in general terms, accept responsibility for damage incurred by the owner, user, other
person or third party using the safety product, which results either directly or indirectly from incorrect use and/or maintenance of the
safety product, including use of the product for any purpose other than that for which it was supplied and/or non-compliance with or
incomplete observance of the instructions contained in this user manual and/or in connection with repairs to the safety product which
have not been carried out by us or on our behalf.
Our General Sales and Supply conditions are applicable to all transactions. Honeywell Respiratory Safety Products continually strives
to improve its products and reserves the right to change the specifications mentioned in this manual without prior notification.
The European Directive 89/686/EEC covering Personal Protective Devices stipulates that only inspected
protective devices bearing the CE mark may be traded and used. Use of substitute, non-original spare parts,
invalidates the CE approval and also all rights relating to the guarantee, whereby the user and also the
person initially marketing these spare parts shall be punished by the relevant authorities of the EEC member
countries, whereby additionally, the entire product will be excluded from use and withdrawn from commercial
transactions, respectively. Original spare parts can be recognized by the affixed code numbers,
supplemented with the manufacturer's mark and the "CE approval" mark, possibly supplemented with a year
of applicability.
13. WARRANTY
Honeywell Respiratory Safety Products will repair or, if necessary, replace this product free of charge in the event of a material or
manufacturing defect within 12 months of the purchase date, provided that the product has only been subjected to normal usage in
accordance with the user manual. The guarantee is invalidated if the type or serial number marking is modified, removed or made
illegible.
Products specified in this manual are products of:
Honeywell Respiratory Safety Products, an ISO 9001 certified Manufacturer of Respiratory Protective Devices.
ZI PARIS NORD II – B.P. 50288
33, rue des Vanesses
95958 ROISSY CDG Cedex
FRANCE
Products specified in this manual are manufactured in:
NORTH Safety Products
900 Douglas Pike Smithfield
Rhode Island
USA
European directive on personal protective devices
Powered filtering devices incorporating a helmet or hood.
INSPEC, 56 Leslie Hough Way, Salford
Greater Manchester, M6 6AJ, United Kingdom
CE 0194
EN-5