Motorola OM 1000 Installation And Operation Manual page 36

4-8 Setup and Operation
ADMIN Menu⎯Purging the OM 1000 Software
Use the following procedure to purge the OM 1000 software and reboot the unit:
1
Select ADMIN on the MAIN menu (Figure 4-2) and then press
Administrative menu.
2
Select PURGE AND REBOOT on the OM 1000 Administrative menu (Figure 4-3), and
then press .
ENT
3
Press . When the unit displays OK, press
OM 1000 (the OM 1000 will reboot as a result of this operation).
This command is used to ensure that current software files are deleted before reloading the
OM 1000 with new software. The OM 1000 software consists of multiple files; since future
revisions of the OM 1000 software may not use all current files, this command ensures there
is enough space in flash memory to load a new version of the software.
This operation does not delete the configuration settings in flash memory.
CAUTION!
If the BOOTP server is NOT on the local network, the OM 1000 will not be reloaded with software and will not be
rebooted. Erasing OM 1000 software should only be done when a new version of OM 1000 software is to be loaded
onto the OM 1000.
OM 1000 Installation and Operation Manual
ENT
to execute the purge operation of the
ENT
to display the