Controls And Indicators; Figure 2-6 Om 1000 Front Panel - Motorola OM 1000 Installation And Operation Manual

2-8 Overview

Controls and Indicators

The OM 1000 controls and indicators, as well as the RF monitor jack, are located on the front
panel. Figure 2-6 illustrates the front-panel controls and indicators:
Figure 2-6
OM 1000 front panel
TEST
-20dB
A
Table 2-3 summarizes the function of the RF monitor jack and each control/indicator:
Table 2-3
OM 1000 front panel RF monitor jack, controls, and indicators
Key Control/Indicator
A
B
C
D
E
POWER
DATA IN
EXT SYNC
PLL ERROR
RF E RROR
FAULT SUMM
OM 1000 Installation and Operation Manual
B
Description
TES T
–
20 dB
-20dB
the RF output at the front panel. This is an F-type connector.
The status display is a two-line, 40-character-per-line,
dot-matrix, high-contrast backlit LCD.
The menu select keys are a four-button cluster of up/down and
left/right keys that enable configuration and setup of OM 1000
operating modes. The keys are set flush with the level of the
front panel to minimize the potential for accidental operation.
The
ENT
ENT
by preventing single-button operation from changing the unit
configuration.
The LEDs indicate OM 1000 operating status and error
conditions. Refer to Section 5, "Troubleshooting", for details on
each status LED.
ENT
C D
RF monitor jack enables convenient monitoring of
TEST
key enables activation of keypad data. It adds security
OM 1000
POWER
DATA IN
EXT SYNC
PLL ERROR
RF ERROR
FAULT SUMM
E