Wind Settings - Sony XVS-9000 User Manual

Notes
• When you change the selection in the <Combine
Process> group, the afterimages which had been added
up to then disappear.
• When you do not combine images, the Keyframe Strobe
effect only is applied, regardless of the selection in the
<Combine Process> group.
In the <Combine Process> group of the DME >Light/Trail
>KF Strobe menu (4154), select one of the following.
Combine −> KF STRB: Add the Keyframe Strobe effect
after the combine. The parameter data for the channel
with the lowest number among the channels being
combined is enabled.
KF STRB −> Combine: Add the Keyframe Strobe effect
before the combine. Parameters can be set
independently for each channel.

Wind Settings

Note
Enabling Wind automatically disables Trail, Motion
Decay, or Keyframe Strobe if it is set.
Applying the Wind effect
1
Open the DME >Light/Trail >Wind menu (4155).
2
Press [Wind], turning it on.
3
Set the following parameters.
No. Parameter Adjustment
1 Decay Amount of afterimage displayed
2 Shift H Extension in the horizontal
direction
3 Shift V Extension in the vertical direction
a) 0.00 represents no afterimage. 100.00 represents no decay in the
afterimage.
Selecting the signal for the afterimage
portion
In the <Wind Source> group of the DME >Light/Trail
>Wind menu (4155), select the image to insert in the
afterimage trail.
Notes
• Only [Mix Color] or [Ext Video] can be used between
the Background (see page 269), Flex Shadow (see
page 232), Trail (see page 258), and Wind effects. If
[Mix Color] or [Ext Video] is selected for one of these
effects, the [Mix Color] or [Ext Video] for the other
effects is disabled, and [Flat Color] is selected in its
place.
• When executing a 4-channel combination, [Mix Color]
and [Ext Video] cannot be selected.
Freeze Video: Freeze the input image to use as the
afterimage.
Flat Color: Uses a single color matte as the afterimage.
You can set the following parameters.
No. Parameter Adjustment
1 Luminance Luminance
2 Saturation
3 Hue
Hue Rotate: Use a color matte whose hue varies slightly
with each frame for the trail of the afterimages. You
can set the following parameters.
No. Parameter Adjustment
1 Luminance Luminance
2 Saturation
3 Hue Speed Speed at which the hue changes
Mix Color: Insert a mix color signal (see page 237) in the
afterimage portion.
Ext Video: Insert an external video signal input from Ext
In in the afterimage portion.
Rainbow: Use a freeze image with the hue changing every
frame in the afterimage portion. The difference from
[Hue Rotate] is that many colors appear
simultaneously. You can set the following parameters.
No. Parameter Adjustment
1 Luminance Luminance
a) 2 Saturation
3 Hue Speed Speed at which the hue changes
Modulating the afterimage portion
(Modulation)
1
In the DME >Light/Trail >Wind menu (4155), press
[Modulation], turning it on.
2
Set the following parameters.
No. Parameter Adjustment
1 Amp H
2 Freq H
3 Amp V
4 Freq V
262
Saturation
Hue
Saturation
Saturation
Horizontal amplitude of the wave
Frequency of wave in horizontal
direction
Vertical amplitude of the wave
Frequency of wave in vertical
direction