Chapter 15 Macros; Macros; Overview - Sony XVS-9000 User Manual

Macros

Macros

Overview

A macro is a function that is used to store a sequence of
control panel operations (events) as data in memory
(macro register), which you can recall to reproduce the
same sequence of operations as required.
To record menu operations in memory, see "Menu
Macros" (page 365).
Macro registers
The area of memory that holds a macro is termed a "macro
register." For each control panel, there are 250 macro
registers, numbered 1 to 250.
Events
The individual control panel operations constituting a
macro are termed "events." One macro can contain a
maximum of 99 events.
The following table shows the operations for each control
block of the control panel that can be saved as events in a
macro.
Control block Event
Cross-point control • Cross-point selection
block
• Recalling a function assigned to
a cross-point button
• AUX mix transition enable/
disable
• Page recall on cross-point pad
• Delegation selection in cross-
point button rows (free assign
mode only)
AUX bus control block • Cross-point selection
(AUX bus operation
• AUX mix transition enable/
mode)
disable
• Page recall on cross-point pad
AUX bus control block • Cross-point selection
(router operation
• Page recall on cross-point pad
mode)
Chapter
Control block
Transition control block • Auto transition and cut in the
Transition control block
(simple type)
Independent key
transition control block
Flexi Pad control block • Selection of transition type of
Key fader control block • Auto transition and key on/off in
Numeric keypad
control block
Device control block
(trackball)
343
15
Event
transition execution section
• Auto transition and key on/off in
the independent key transition
a)
execution section
• Next transition selection
• Transition type selection
• Pattern limit enable/disable
• VTR/disk recorder/frame
memory clip playback, stop,
b)
cue-up
• Auto transition
b)
• Cut
• Transition type selection
• Pattern limit enable/disable
• VTR/disk recorder/frame
memory clip playback, stop,
b)
cue-up
Auto transition and key on/off
independent key transition
• Recalling the following data
- Key snapshots
- Snapshots
- Wipe snapshots
- DME wipe snapshots
- Shotboxes
- Master timelines
• Executing effects, rewind
the independent key transition
a)
execution section
• Transition type selection
• Recalling key snapshots
Recalling the following data
- Effects
- Snapshots
- Shotboxes
- Master snapshots
- Master timelines
• VTR/disk recorder/frame
memory clip playback, stop, fast
forward, rewind, cue-up, start
point setting
• Recording to VTR/disk recorder
• Frame memory clip loop setting
b)
a)