Sending An Rms Status; Additional Address - Motorola MTM800 FuG Feature User Manual

68015000585-MF
Chapter 4: Main Menu
4.3.10

Sending an RMS Status

Prerequisites: This feature is only available when enabled by your service provider. See
Messaging System (RMS) on page 133
Procedure:
1 Perform one of the following actions:
If...
If the radio is in the
RMS mode,
If the radio is not in
the RMS mode,
NOTICE: The navigation through the radio menu is only available if your service provider
enabled the Send RMS/FMS menu item. However, your service provider can configure a
One Touch Button to display the Send RMS/FMS menu even if the navigation is not
possible.
If the radio is not in RMS Mode, and the Send RMS/FMS menu item is disabled, and no
One Touch Button is configured to display the Send RMS/FMS menu, then the radio can
only receive RMS messages but cannot send them.
2 Perform one of the following actions:
• Press and hold a required key (for RMS status 0–9).
• Press the required two keys combination (for RMS status 10–99).
• Scroll to the required RMS status.
• Type out a message using RMS Free Text (available in SDS-TL only).
4.3.11

Additional Address

The Additional Address feature allows the radio to send Radio Messaging System (RMS) messages
and Local Information Protocol (LIP) reports to additionally defined recipients.
The default addresses where the radio sends RMS messages and LIP reports are defined by your
service provider. If an additional address is selected and enabled, RMS messages and LIP reports are
also sent to that address.
You can create, edit, and delete additional addresses using the radio menu. If an additional address is
configured by your service provider, the service provider can disable the edition and deletion of the
address using the radio menu.
You can define up to 30 additional addresses.
78
for details.
Then...
go to step 2.
a Perform one of the following actions:
• From the home screen, press Menu → Messages → Send
RMS/FMS.
• Press and hold the One Touch Button configured to display
the Send RMS/FMS menu.
• Use a menu shortcut assigned to the Send RMS/FMS
menu.
b Go to step 2.
Radio