Talkgroup For Individual Calls; Network Monitor; Enabling Network Monitor - Motorola MTM800 FuG Feature User Manual

3.3.8

Talkgroup for Individual Calls

Talkgroup for Individual Calls is a talkgroup that operates on a separate frequency allocated for
individual (private) calls only. Using this talkgroup optimizes frequency resources and helps not to
block other talkgroups. The only supported call types are: private calls and emergency calls (both
private and group). Use this talkgroup each time you need to make a private call.
When you select a Talkgroup for Individual Calls, your radio is not able to receive or initiate any group
or broadcast calls with priority lower than Emergency.
When you have selected a Talkgroup for Individual Calls and press the PTT button to start a Group
Call, the radio:
• Rejects the call
• Plays a tone
• Displays the Individual Calls Only message
3.3.9

Network Monitor

This feature allows the radio to monitor for Trunked Mode Operation (TMO) individual calls while
maintaining Direct Mode Operation (DMO) services. This feature is a selling feature.
When Network Monitor is active, the radio receives direct calls addressed to the selected DMO
talkgroup, private DMO calls, Short Data Service (SDS) messages, and also private TMO calls.
The group calls, private calls, and SDS messages initiated are configured in DMO. Only responses to
private TMO calls are sent in TMO.
3.3.9.1

Enabling Network Monitor

Procedure:
1 From the home screen, press Options.
2 Select Network Monitor.
TMO
Private Call
DMO
68015000585-MF
Chapter 3: Modes
51