2.9
Status Icons
Status icons appear when your radio is engaged in certain activities or when you have activated certain
features.
Table 11: Status Icons
Icon
Description
Trunked Mode Operation (TMO)
In Service
No Service
Signal Strength – The more bars, the stronger the signal.
Migration – Indicates that the radio is registered to a foreign network.
Broadcast Call – Indicates that the radio is in a Broadcast Call.
Gateway Mode – Indicates that the radio is operating as a gateway in Gateway
Mode.
Scan – Indicates that talkgroup scanning is activated in the radio.
Packet Data or Multi-Slot Packet Data (MSPD) / TETRA Enhanced Data Services
(TEDS) – The more blue sections on the icon, the faster the data transfer. Possible
status:
•
Four gray sections: context activated – data idle
•
One blue: Packet Data active
•
Two blue: Multi-Slot Packet Data active
•
Three blue: TEDS 25 kHz active
•
Four blue: TEDS 50 kHz active
Direct Mode Operation (DMO)
Direct Mode Call – Indicates that the radio is receiving a Direct Mode call. The more
bars, the stronger the signal.
Direct Mode – Indicates that radio is in Direct Mode (radio-to-radio communication).
Repeater Mode – Indicates that radio is operating as a repeater in Repeater Mode.
DMO Gateway Communication Mode – Indicates that gateway is selected. The icon
has the following status:
•
Solid – when the radio is synchronized with the gateway.
•
Blinking – when the radio is not synchronized or during attachment.
•
No icon – during radio-to-radio and repeater communication.
68015000585-MF
Chapter 2: Getting Started
33