Table of Contents
Advertisement
NetCam2
_ii_00592en.qxd
NetCam2
4.2.11 Alarm Configuration
•
Motion Detection Threshold – sets the threshold for the motion detection
function. Threshold '0' is the most sensitive state (low threshold) and '900'
is the least sensitive state (high threshold).
•
Alarm Parameters for E-mail / FTP Application: - defines the image-
recording parameters for the NetCam2. If the NetCam2 detects events
through motion detection function (MD Event) or external sensor (SID1
Event), image storage is triggered.
Note: NetCam2 can record 2 images for 2 seconds before the event, one image of the
event and 2 images for 2 seconds after the event. Its maximum recording rate is 1
frame per second. The NetCam2 records the 5 images to send them through E-mail or
FTP. If an event lasts long, NetCam2 sends the images once only regardless of the
overlapping time setting.
Refer also to the 'Application Configuration' and 'Alarm Configuration' pages to
set up other relevant parameters.
46
All manuals and user guides at all-guides.com
1/23/03
2:22 PM
Page 46
Section 4
Advertisement
Table of Contents
