Table of Contents
Advertisement
NetCam2
_ii_00592en.qxd
NetCam2
4
CONFIGURING ADMINISTRATOR'S OPTIONS
4.1
Login
4.1.1
Accessing Administration from Setup program
•
Click on the MAC address of the NetCam2.
•
Type in the administrator's password and then click the 'Start Configuration'
button. The setup program automatically connects to the Admin page of
NetCam2's Homepage.
4.1.2
Accessing through Web browser
•
On the Web browser, key in the IP address of the NetCam2 to be
configured.
•
At the login page, type in the administrator's ID and password to access the
Admin page.
Note: An administrator may also access the NetCam2 real-time image viewer, and
access the Admin page by clicking on 'Admin' button.
Note: The default administrator's ID and password are both set to 'admin'. The
administrator may change them (max 9 characters) on the Admin page.
•
From the NetCam2 homepage, click on 'Administration'.
28
All manuals and user guides at all-guides.com
1/23/03
2:22 PM
Page 28
Section 4
Advertisement
Table of Contents
