NetCam2
_ii_00592en.qxd
NetCam2
4.2.6
Video Configuration
•
Video Channel Select – it is possible to configure each individual channel.
Select the Camera to configure from the pull-down menu.
•
Video Channel Status – Select 'Disable' or 'Enable' (a disabled channel will
be black when selected).
•
Camera Color Type – Select 'Color' or 'Black/White' (as appropriate).
•
Video Signal Type – Select 'NTSC' or 'PAL' (as appropriate).
•
Camera Installation Angle – Enables image rotation by 90°, 180° or 270°.
•
Select 'Apply' for one camera to save the information before configuring the
next camera.
38
All manuals and user guides at all-guides.com
1/23/03
2:22 PM
Page 38
Section 4