Replace The Filters; Replace The Multi-Care Filter - Philips AC4084 User Manual

7 Replace the
filters
The filter lights ( / /
filter has to be replaced.
Note
•
If you remove the front panel for filter changing while
the appliance is switched on, all lights on the control
panel are off and the appliance stops operating.
•
Once the front panel is placed back to the appliance,
all lights flash twice. Then, the appliance returns to its
operating state.
Replace the Multi-care filter
Note
•
The Multi-care filter is available for AC4085 only. For
AC4084, the Multi-care filter is sold separately.
•
The Multi-care filter is not washable nor vacuum
cleanable.
Replace the Multi-care filter when the filter
light flashes.
Tip
•
When you remove or insert filters, place the
appliance against a wall for more stability.
) indicate which
1
2
3
4
Note
•
Insert the filters in the correct position.
•
Make sure that you place the filters in the order of
HEPA filter, activated carbon filter, Multi-care filter,
and finally the pre-filter.
•
Make sure that the side with the tag is pointing
towards you.
Switch off the appliance and unplug it.
Place your fingers in the recesses of the
side panels.
Gently pull the bottom of the panel out,
then lift the top part of the front panel
towards you.
2
1
Remove the pre-filter from the appliance.
1
2
EN
25