Replace The Filters; Replace The Activated Carbon Filter And The Hepa Filter - Philips AC4001 User Manual

6 Replace the
filters
The indicator of the filter replacement
indicates the filters have to be replaced.
Replace the activated carbon
filter and the HEPA filter
Note
•
The activated carbon filter and the HEPA filter are not
washable nor vacuum cleanable.
Replace both the activated carbon filter
and HEPA filter when the indicator of the
filter replacement goes on. This will last for
approximately 2 weeks.
Tip
•
When you remove or insert filters, place the purifier
against a wall for more stability.
Notes
•
Insert the filters in the correct position.
•
Make sure you place the filters in the order of HEPA
filter, and then the activated carbon filter.
•
Make sure that the side with the tag is pointing towards
you.
1
Switch off the purifier and unplug it.
EN
11
2
Place your fingers in the recesses of the
side panels and gently pull the front panel
towards you.
3
Lift the panel off the hooks at the bottom
of the purifier.
4
Remove all the filters from the purifier.
5
Remove all packaging material from the
new filters.
6
Place the new HEPA filter in the purifier
first. Then, place the new activated carbon
filter in the purifier.
7
To reattach the front panel, insert the
bottom hooks into the bottom of the
purifier first. Then, push the panel against
the body of the purifier.
8
Plug the air purifier into the power supply.
Then, press the
the purifier.
9
Press and hold the
seconds to reset the filter.
» The filter replacement indicator goes
off.
3"
button to switch on
button for 3