Advertisement
22. Insert the VPR-101 board along the rails
shown in the fi gure to the position where the
VPR-101 board is drawn out of the unit about
30 mm.
n
Slowly insert the VPR-101 board straight.
23. When the HKSR-9001 is installed in the unit,
connect the three coaxial cables disconnected
in step 15 to the connectors CN1012,
CN1010, and CN1011 on the TR-139 board.
(Refer to Section 1-4-2.)
n
Match the colors of the coaxial cables with
the silk print R (Red), G (Gray), and B (Blue)
on the TR-139 board.
24. Arrange the three coaxial cables as shown in
the fi gure.
25. Hook portion A (three locations) of the cable
stopper (BNC-2) to the edge of the heatsink
(TR) assembly, and secure the cable stopper
with a screw with stopper.
1-6 (E)
Heatsink (TR)
assembly
Gray
A
Cable stopper (BNC-2)
VDA-69 board
VPR-101 board
RE-244 board
SS-103 board
SS-103 board
RE-244 board
VPR-101 board
VDA-69 board
Coaxial cables
Blue
B
G
R
Red
Coaxial cable
TR-139 board
Screw with stopper
HKSR-9003
Advertisement
