Advertisement
17. Remove the two screws to detach the dummy
plate (PR).
18. Remove the two nylon rivets securing the
heatsink (PR) assembly to the PR-318 board.
19. Check that radiation sheets (9 x 12) are
attached to IC1000, IC1001, IC1003, IC1200,
and IC1202 on the PR-318 board.
20. Connect the connector CN100 on the PR-318
board to the connector CN2201 on the
VPR-101 board.
21. Install the heatsink (PR) assembly with the
supplied three screws.
HKSR-9003
Dummy plate (PR)
VPR-101 board
Heatsink (PR) assembly
IC1202
Radiation sheet (9 x 12)
IC1200
IC1000
VPR-101 board
B2 x 4
B2 x 4
B2 x 4
IC1003
IC1001
PR-318 board
CN100
CN2201
1-5 (E)
Advertisement
