Table of Contents
Advertisement
Because airless spray units develop extremely high pressures,
Always follow the manufacturer's recommendations on maximum
-
Before removing or adjusting any part of equipment
(including tip) and/or discontinuing spraying operation:
Follow the manufacturer's recommendations for maximum pressures, periodic cleaning,
maintenance and parts replacement procedures.
Do not operate the equipment if there are any leaks from spray gun, fittings, or hoses.
High pressure leaks can penetrate skin causing serious injuries.
Caution: If skin is hit by spray liquid, contact physician immediately because any skin penetration
can cause permanent injury.
Note to Physician: Injection into skin is a serious, traumatic injury. Contact National Poison
Control Center Network, 412-681-6669 for treatment regimen.
©Alcor 2011 All rights reserved
Save & Display prominently in spraying area
WARNING
severe injury may result from any skin penetration.
- Never put your hand or fingers in front of gun.
- Never point gun at your body - or anyone else.
-Never leave gun unattended without releasing pressure.
Before turning "On" pump:
pressures and operating instructions.
Always make sure trigger lock is properly adjusted.
-
Always shut off engine/pump.
-
Always discharge contents of gun to eliminate pressure.
-
Stay Safe !
9
Advertisement
Table of Contents
