Advertisement
By Honeywell
Troubleshooting
BioHarness 3 not linking to RAELink3:
Make sure the BioHarness Echo Module is charged and turned on.
Make sure the Bluetooth Power is on for the RAELink3.
Make sure RAELink3 is set to Remote and BT: BioHarness 3.
Confirm that the initial pairing has occurred between RAELink3 and BioHarness Echo Module.
Make sure other BioHarness Echo Modules are not trying to establish a Bluetooth link at the
same time.
LED indicators:
LED
State
Orange
Off
Flash
Solid
Blue
Off
Flash
Solid
Red
Off
Flash
Solid
Green
Solid
Flash
Off
LED
State
Orange
Off
Solid
Flash
Blue
Off
Red
Green
Solid
Off
Flash
RAELink3 Remote not communicating with ProRAE Guardian software:
Confirm that both the HOST RAELink3 modem and the RAELink3 modem connected to the
BioHarness 3 have the same NETWORK ID.
Confirm the correct communication port (COM port) for the RAELink3 Host modem is selected
within ProRAE Guardian software.
Make sure the RAELink3 is assigned a unique Unit ID.
Confirm that the RAELink3 is not low on power.
On Subject
<10% battery remaining
>30% battery remaining
<30% battery remaining
Disconnected or disabled
Bluetooth connection
Bluetooth error
Heart rate not locked or
device is not being worn
Heart rate locked
Error
Logging error
Logging
Not logging
In Cradle
No power or not fully in cradle
Charged
Charging
Should be off at all times
Should be off at all times
Logging error
No logs/finished downloading
Downloading
5
BioHarness 3
QUICK REFERENCE
Orange LED
Battery Indicator
Blue LED
Bluetooth
Indicator
Rev. C May 2014
PN 039-4007-001
Red LED
Heart Rate Indicator
Green LED
Logging
Indicator
Advertisement
