Operating Elements And Terminal Blocks - AEG Thyro-A H1 Series Operating Instructions Manual

7.2 Operating elements and terminal blocks

This chapter describes the available terminal blocks, plug connectors and operating elements.
Configuration of the 7 pin connector of slots X1 to X8:
1 Switched ground potential. All pins 1 of slots X1 – X8 are connected.
2 RxD
3 TxD
4 Ground
5 Switchable ground potential. The slots X1 – X8 can be switched as desired.
6 Ground
7 Ground potential for shield connection
Configuration of the 3 pin connector X11:
X11: +24V
X11: 24V - ground
X11: Grounding, carry out by as short a route as possible.
28